您的位置: 首页 » 法律资料网 » 法律法规 »

中华人民共和国海关对保税仓库及所存货物的管理办法(附英文)

作者:法律资料网 时间:2024-05-13 17:48:45  浏览:8270   来源:法律资料网
下载地址: 点击此处下载

中华人民共和国海关对保税仓库及所存货物的管理办法(附英文)

海关总署


中华人民共和国海关对保税仓库及所存货物的管理办法(附英文)

1988年4月14日,海关总署

第一条 为了适应对外经济贸易的发展,便利生产、仓储、运输,促进社会主义现代化建设,根据《中华人民共和国海关法》,特制定本办法。
第二条 保税仓库限于存放供来料加工、进料加工复出口的货物,或者暂时存放后再复运出口的货物以及经海关批准缓办纳税手续进境的货物。一般贸易进口货物不允许存入保税仓库。
第三条 保税仓库应具有专门储存、堆放进口货物的安全设施;建立健全的仓储管理制度和详细的仓库帐册;配备经海关培训认可的专职管理人员。保税仓库的经理人应具备向海关缴纳税款的能力。
建立保税仓库应由其经理人持工商行政管理部门颁发的营业执照,填写《保税仓库申请书》,并按规定交验经贸主管部门批准经营有关业务的批件,向海关提出申请,经海关审核并派员实地调查后颁发《保税仓库登记证书》。
第四条 保税仓库对所存的货物,应有专人负责,并于每月的前五天内将上月转存货物的收、付、存等情况列表报送当地海关核查。
保税仓库中不得对所存货物进行加工。如需改变包装、加刷唛码,必须在海关监管下进行。
海关认为必要时,可以会同保税仓库经理人双方共同加锁。海关可以随时派员进入仓库检查货物的储存情况和有关帐册,必要时可派员驻库监管。保税仓库经理人应当为海关提供办公场所和必要的方便条件。
保税仓库经理人应按章交纳监管手续费。
第五条 保税货物在保税仓库所在地海关入境时,货主或其代理人应当填写进口货物报关单一式三份,加盖“保税仓库货物”印章并注明此货物系存入某保税仓库,向海关申报,经海关查验放行后,一份由海关留存、二份随货带交保税仓库。保税仓库经理人应于货物入库后即在上述报关单上签收,一份留存、一份交回海关存查。
货主在保税仓库所在地以外的其他口岸进口货物,应按海关对转关运输货物的规定办理转关运输手续。货物运抵后再按本条第一款的规定办理入库手续。
第六条 保税货物经海关核准转为进入国内市场销售时,由货主或其代理人向海关递交进口货物许可证件、进口货物报关单和海关需要的其他单证并交纳关税和产品(增值)税或工商统一税后,由海关签印放行,将原进口货物报关单注销。
对用于中、外国际航行船舶的保税油料和零备件,以及用于在保修期限内免费维修有关外国产品的保税零备件,免征关税和产品(增值)税或工商统一税。
第七条 对从来料加工、进料加工备料保税仓库提取的货物,货主应事先持批准文件、合同等有关单证向海关办理备案登记手续,并填写来料加工、进料加工专用报关单和《保税仓库领料核准单》一式三份,一份由批准海关备存,一份由领料人留存,一份由海关签盖放行章后交货主。
仓库经理人凭海关签印的领料核准单交付有关货物并凭以向海关办理核销手续。
对提取用于来料加工、进料加工的进口货物,海关按来料加工、进料加工的规定进行管理并按实际加工出口情况确定免税或补税。
第八条 保税货物复运出口时,货主或其代理人应当填写出口货物报关单一式三份并交验进口时由海关签印的报关单,向当地海关办理复运出口手续。经海关核查与实货相符合签印,一份留存,一份发还,一份随货带交出境地海关凭以放行货物出境。
第九条 保税仓库进口供自己使用的货架、办公用品、管理用具、运输车辆,搬动、起重和包装设备以及改装用的机器等,不论是价购的或外商无价提供的,应按规定交纳关税和产品(增值)税或工商统一税。
第十条 保税仓库所存货物储存期限为一年。如因特殊情况可向海关申请延期,但延期最长不得超过一年。保税货物储存期满仍未转为进口也不复运出境的,由海关将货物变卖,所得价款比照《中华人民共和国海关法》第二十一条的规定处理。
第十一条 保税仓库所存货物在储存期间发生短少,除由于不可抗力的原因者外,其短少部分应当由保税仓库经理人承担交纳税款的责任,并由海关按有关规定进行处理。
第十二条 保税仓库经理人如有违反本办法规定的行为或走私行为,由海关按《中华人民共和国海关法》和有关规定进行处理。
第十三条 本办法自一九八八年五月一日起实施。

Administrative Rules of the Customs of the People's Republic ofChina Concerning the Bonded Warehouse and Goods

(Promulgated by the General Administration of Customs of thePeople's Republic of China on April 16, 1988)

Whole Doc.
Article 1
The present rules are hereby formulated in order to meet the
development of foreign economic relations and trade, and facilitate
production, storage and transportation and promote the construction of
socialist modernization in accordance with the Customs Law of the People's
Republic of China.
Article 2
The bonded warehouse is confined to store goods of processing
imported materials and buyer-supplied materials for re-export, or goods of
temporary storage for re-export, and goods permitted by the Customs to
enter the territory and suspend the formality of import duty. Other
imported goods for general trade shall not be allowed to be stored in the
bonded warehouse.
Article 3
The bonded warehouse shall have special security facilities for
storing and piling up the imported goods; shall establish complete
warehouse management system and detailed warehouse account books; shall
provide full-time management personnel trained and approved by the
Customs. The operator of the warehouse shall have ability to pay tax to
the Customs.
When setting up a bonded warehouse, the operator shall fill in the
"Application for Bonded Warehouse Form" with the business license issued
by the administrative bureau for industry and commerce, and shall submit
the document of approval permitting to conduct the relevant businesses
issued by the competent authority of foreign economic relations and trade,
and apply to the Customs. After the on-the-spot investigation and
examination by the Customs, the "Registration Certificate of Bonded
Warehouse" shall be issued.
Article 4
The bonded warehouse shall have full-time personnel in charge of the
storage of the goods, and shall list receipt, delivery and storage of the
stored goods of last month into forms and report them within the first 5
days of each month to the Customs for verification.
The stored goods shall not be processed in the bonded warehouse. If
it is necessary to change the packages or print shipping marks, it shall
be conducted under the Custom's supervision and control.
Considering necessary, the Customs may add locks jointly with the
operator of the bonded warehouse. The Customs may at any time send its
officer into the warehouse to check the storage and relevant account books
of the goods, if necessary, the Customs may send its officer to station in
the warehouse for supervision and control. The operator of the bonded
warehouse shall offer office and necessary convenience for the Customs.
The operator of the bonded warehouse shall pay the fees of the
supervision and control in according to regulations.
Article 5
When the bonded goods enter into the territory through the Customs at
which the bonded warehouse is located, the owner or his agent shall fill
in declaration for imported goods intriplicate, and affix "Goods of Bonded
Warehouse and state the goods will be stored in the specific bonded
warehouse and declare to the Customs. After examination and release by the
Customs, one copy shall be kept for the Customs' record, and other two
copies shall be handed over to the bonded warehouse with the goods. The
operator of the bonded warehouse shall at once sign the declaration after
the receipt of the goods. One copy of the declaration shall be kept for
record, and another copy shall be handed back to the Customs for record.
If the owner imports goods at a port at which the warehouse is not
locate, the owner shall go through the formalities of transportation
between deferent Customs according to the provisions of the Customs. When
the goods arrive at the destination, the owner shall go through the
formality of storage according to the provisions stipulated in Paragraph
One of this Article.
Article 6
When the bonded goods enter the domestic market for sale upon
verification and permission by the Customs, the owner of the goods or his
agent shall submit the licenses of imported goods, the declaration for
imported goods and other necessary documents to the Customs and pay the
customs duty, product (value added) tax and consolidated industrial and
commercial tax, and then the Customs shall release the goods with stamps
on the documents, and shall nullify the original declaration for imported
goods.
The bonded fuel and spare parts used by Chinese or foreign vessels on
international routes and the bonded spare parts used for maintaining
relevant foreign products free of charge relevant foreign products during
the garantee period shall be exempted from the Customs duty, the product
(value added) tax and the consolidated industrial and commercial tax.
Article 7
When the owner wants to take delivery of the goods from the bonded
warehouse of processing import materials and buyer-supplied materials, the
owner shall beforehand go through the Customs formalities of registration
on file with the document of approval contract and relevant documents and
fill in the special declaration for processing imported materials and
buyer-supplied materials the "Release Certificate of the Materials of
Bonded Warehouse" in triplicate. One copy of the release certificate shall
be kept by the approving Customs on file, one copy shall be kept by the
person who draws the materials for records, and one copy shall be sent
over to the owner of the goods with the Customs' stamp of release. The
operator of the warehouse shall deliver the relevant goods based on the
Release Certificate of the Materials with the Customs' stamp on it, and by
it go through the procedure of conciliation to the Customs.
For drawing the imported materials used for processing imported
materials and buyer-supplied materials, the Customs shall administrate
them according to the regulations concerning processing imported materials
and buyer-supplied materials, and decide tax exemption or collection
according to actuarial facts of processing and export.
Article 8
When bonded goods are re-exported, the owner of the goods or his
agent shall fill in the declaration for exported goods in triplicate and
submit the declaration with the Customs' stamp obtained when the goods
were imported for examination, and then go through the Customs formalities
of re-export. After the documents have been examined by the Customs to
tally with the goods, the Customs shall affix on the declaration for
exported goods. One copy of the declaration shall be kept on file, one
copy shall be handed back, and one copy shall be brought with the goods to
the Customs where the goods leave the territory. By it the Customs will
release the goods out of the territory.
Article 9
The goods shelves, office stationery, equipment for management,
transport vehicles, equipment for moving, lifting and packaging and
machines for refitting imported for self-use of the bonded warehouse shall
be collected the Customs duties, the product (value added) tax and the
consolidated industrial and commercial tax according to the regulations,
no matter the equipment were purchased at price or offered free of charge
by foreign businessmen.
Article 10
The duration of the goods stored in the bonded warehouse is one year.
The extension of duration may be applied to the Customs because of special
situations, but the extension shall not exceed one year. The bonded goods
which have not been imported nor re-transported out of the territory after
the duration, shall be sold off by the Customs. The earnings gained from
the sale shall be handled according to the provisions of Article 21 of the
Customs Law of the People's Republic of China.
Article 11
If the goods stored in the bonded warehouse happen to be missing in
the duration, the operator of the bonded warehouse shall take the
liability to pay the taxes for the shortage unless it is due to force
majeure. And the matter shall be dealt with by the Customs according to
relevant regulations.
Article 12
If the operator of the bonded warehouse violates the present rules or
undertakes smuggling, the Customs shall handle the case in accordance with
the Customs Law of the People's Republic of China and the relevant
regulations.
Article 13
These present Rules shall enter into force on May 1, 1988.


下载地址: 点击此处下载

禁止进口限制进口技术管理办法

对外经济贸易 科学技术部



对外经济贸易合作部

科 学 技 术 部

二○○一年 第 16 号

根据《中华人民共和国对外贸易法》和《中华人民共和国技术进出口管理条例》,现发布《中国禁止出口限制出口技术目录》,本办法自 2002年1月1日起施行。

部长  石广生

部长  徐冠华

二○○一年十二月十二日



中国禁止出口限制出口技术目录

对外贸易经济合作部 科学技术部

目录格式说明

目录格式:

  编 号:(1)××××××J(X)

  技术名称:(2)_______________

  控制要点:(3)_____。(出口条件)

说明:

(1)编号:共7位

年度代码 + 分类号 + 技术名称 + 控制等

            类目号   级代码
2位数字   2位数字 2位数字   1位字母

年度代码由目录编制年度的后两位数字构成

分类号和技术名称类目号与排序索引表中相应数字 (粗体字为分类号) 对应

控制等级代码中“J”表示禁止出口,“X”表示限制出口。

(2)技术名称:某一类技术的总称。

(3)控制要点:该类技术中需要控制的技术内容、特征及范围。

(4)出口条件:

①“△”表示技术(软、硬件)禁止或限制出口,产品可以出口;

②“◇”表示技术软件禁止或限制出口,技术硬件及产品可以出口;

③“▲”技术(软、硬件)、产品均禁止或限制出口。

注:

(正文中〔方括号〕部分是对前面词语或字母的注释。)

(正文中(圆括号)部分是对前面概念的一般性说明。)



排序索引表

01 工程通用技术

  01、真空技术

  02、声学工程技术

02 测绘技术

  01、大地测量技术

  02、地图制图技术

03、精密工程测量技术

03 地震监测技术

01、地震观测仪器生产技术

04 气象技术

01、雷暴探测与报警技术

05 地质技术

  01、地球物理勘查技术

  02、地球化学勘查技术

  03、地质找矿勘探技术

  04、油气田勘探技术(见石油类目)

06 医学技术

  01、中医医疗技术

  02、潜水医学保障技术

07 药品生产技术

  01、生物技术药物生产技术

  02、化学合成及半合成药物生产技术

  03、天然药物生产技术

04、药用辅料及中间体制备技术

08 中药生产技术

  01、中药材资源及生产技术

  02、中药的配方和生产技术

  03、中药饮片炮制技术

09 医疗卫生器械生产技术

  01、医用诊断器械及设备制造技术

  02、医用治疗器械及设备制造技术

  03、医用材料及制品生产技术

10 农业技术

  01、农作物(含牧草)品种及其繁育技术

  02、经济作物品种、繁育及加工技术

  03、农用机械制造技术

  04、化学农药生产技术(见化工类目)

05、生物农药生产技术(见化工类目)

11 林业技术

  01、林木种质资源及其繁育技术

  02、园林植物、观赏植物繁育技术

  03、林木生长调节剂制造及应用技术

  04、森林病虫害防治技术

  05、野生动物人工繁育及保护技术

06、林产化学产品加工技术

12 畜牧兽医技术

  01、畜牧品种及其繁育技术

  02、畜禽饲料及兽用生产调节剂生产技术

  03、畜产品加工技术

  04、蚕类品种、繁育和蚕茧采集加工利用技术

  05、蜂类品种、繁育和蜂产品采集、加工及利用技术

  06、兽药生产技术

07、兽医卫生检疫技术

13 水产技术

  01、水产品种及其繁育技术

  02、水产病害防治技术

03、水产品加工技术

14 计量技术

  01、计量基、标准制造及量值传递技术

02、计量测试技术

15 工程材料制造技术

01、非晶无机非金属材料生产技术

02、陶瓷材料生产技术

03、耐火材料生产技术

04、低维无机非金属材料生产技术

05、人工晶体生长与加工技术

06、金属基复合材料生产技术

07、无机非金属基复合材料生产技术

08、聚合物基复合材料生产技术

09、金属材料制造技术(见冶金、船舶、航空、航天类目)

  10、有机高分子材料制造技术(见化工类目)

16 矿业工程技术

  01、矿山建设技术

  02、采矿工程技术

  03、选矿工程技术

  04、钻井工程技术

  05、矿山仪器、设备制造技术

  06、矿山产品生产、加工与利用技术

17 石油、天然气开发工程技术

  01、油气田勘探技术

  02、油气井钻井工艺

  03、石油钻采装备制造技术

  04、石油、天然气集输技术

18 冶金工程技术

  01、钢铁冶金技术

  02、有色金属冶金技术

  03、稀土的提炼、加工、利用技术

  04、非晶、微晶金属冶金技术

  05、轧制加工技术

  06、冶金专用耐火材料生产技术

  07、冶金仪器、设备制造技术

19 机械工程技术

  01、铸造技术

  02、热处理技术

  03、通用设备制造技术

  04、通用零部件制造技术

20 仪器、仪表技术

  01、热工量测量仪器、仪表制造技术

  02、机械量测量仪器、仪表制造技术

  03、无损探伤技术

  04、材料试验机与仪器制造技术

  05、计时仪器制造技术

  06、精密仪器制造技术

21 动力工程技术

  01、燃气轮机制造技术

  02、汽轮机制造技术

  03、内燃机制造技术

  04、锅炉制造与燃烧技术

  05、制冷与低温工程技术

22 核技术(另行公布)

23 电工技术

  01、电工材料生产技术

  02、电线、电缆制造技术

  03、电机生产及控制技术

  04、电池制造技术

  05、电器制造技术

  06、电气测量技术

24 电力工程技术

  01、火电工程技术

  02、水电工程技术

  03、输电线路施工及检修技术

  04、输配电及电网控制技术

  05、核电技术(见核技术类目)

25 电子技术

  01、电子元件制造技术

  02、电子器件制造技术

  03、半导体器件制造技术

  04、集成电路制造技术

  05、传感器制造技术

  06、激光技术

  07、微波技术

  08、雷达制造技术

  09、光电子技术

  10、目标特征提取及识别技术

26 通信技术

  01、有线通信技术

  02、无线通信技术

  03、光纤制造及光纤通信技术

  04、通信传输技术

  05、通信网络技术

  06、广播电视技术

27 自动化技术

  01、机器人制造技术

28 计算机技术

  01、计算机硬件及外部设备制造技术

  02、计算机网络技术

  03、信息处理技术

  04、计算机通用软件编制技术(专用软件见有关各类目)

  05、计算机应用技术(单一用途的技术见有关各类目)

29 化学及石油化学工程技术

  01、化学原料生产技术

  02、化肥生产技术

  03、化学农药生产技术

  04、生物农药生产技术

  05、染料生产技术

  06、涂料生产技术

  07、催化剂生产技术

  08、橡胶制品生产技术

  09、感光材料生产技术

  10、合成纤维生产技术(又见纺织类目)

  11、合成树脂及其制品生产技术

  12、聚合材料及其制品生产技术

  13、高能推进剂原材料生产技术(另行公布)

  14、稳定同位素生产技术(又见核技术类目)

  15、石油产品及其生产技术

30 民用爆炸物工业技术

  01、工业炸药及其生产技术

  02、工业雷管及其生产技术

  03、焰火、爆竹生产技术

31 轻工技术

  01、造纸技术

  02、工艺品制造技术

  03、日用陶瓷及其制品生产技术(又见材料类目)

32 食品加工技术

  01、粮食加工技术

  02、糖加工技术

  03、肉类加工技术

  04、蛋品加工技术

  05、饮料生产技术

  06、食品添加剂生产技术

33 纺织技术

  01、纺织天然纤维及其加工技术

  02、纺织天然纤维制品及其加工技术

  03、纺织化学天然纤维及其加工技术

  04、纺织纤维制品及其加工技术

34 建筑工程技术

  01、中国传统建筑技术

  02、建筑结构与地基处理技术

  03、建筑环境控制技术

35 建筑材料生产技术

  01、非金属建筑材料生产技术

36 海洋工程技术

  01、海洋环境仿真技术

37 铁路运输技术

  01、机车工程技术

  02、轮轨技术

38 道路工程技术

  01、筑路材料生产技术(又见材料、建筑材料类目)

  02、桥梁建造与维修技术

  03、隧道施工技术

39 水路运输技术

  01、港口设备制造技术

  02、液体货物运输技术

40 船舶工程技术

  01、船型设计与试验技术

  02、船用设备制造技术

  03、船舶建造工艺

  04、船用材料制造技术

41 航空技术

  01、航空器设计与制造技术

  02、航空器零部件制造及试验技术

  03、航空材料生产技术(又见材料类目)

42 航天技术

  01、航天器测控技术

  02、空间数据传输技术

  03、空间材料生产技术(又见材料类目)

不分页显示   总共8页  1 [2] [3] [4] [5] [6] [7] [8]

  下一页

省政府办公厅关于转发省发展改革委等部门江苏省沿海地区2004-2006年公路水利输电设施建设方案的通知

江苏省人民政府办公厅


苏政办发〔2004〕46号

省政府办公厅关于转发省发展改革委等部门江苏省沿海地区2004-2006年公路水利输电设施建设方案的通知

  

各有关市、县人民政府,省各有关委、办、厅、局,省各有关直属单位:
  省发展改革委、交通厅、水利厅、电力公司制定的《江苏省沿海地区2004-2006年公路、水利、输电设施建设方案》已经省人民政府批准,现转发给你们,请遵照执行。

  
  二○○四年五月二十一日


  

  江苏省沿海地区2004-2006年
  公路、水利、输电设施建设方案
  省发展改革委 省交通厅 省水利厅 省电力公司
  (2004年5月)

  发展海洋经济,建设沿海经济带,是加快我省区域经济共同发展的重要内容。为适应海洋经济快速发展的需要,进一步改善和优化基础设施条件,增强沿海地区经济发展后劲,现对2004--2006年沿海地区公路、水利、输电设施提出如下建设方案:
  一、沿海地区公路、水利、输电设施建设的总体要求、基本原则和主要目标
  根据《省委、省政府关于加快发展江苏海洋经济的若干意见》(苏发〔1996〕5号)和《省政府关于印发江苏省国民经济和社会发展第十个五年计划海洋经济发展专项规划的通知》(苏政发〔2001〕159号)精神,结合当前海洋经济发展实际,2004-2006年沿海地区公路、水利、输电设施建设的总体要求是:紧紧围绕发展海洋经济、建设“海上苏东”的目标,因地制宜,合理布局,突出重点,加大投入,力争到2006年末沿海地区的公路、水利、输电设施条件显著改善。
  基本原则是:坚持基础设施先行,处理好当前和长远的关系,适度超前,加快建设步伐;坚持统筹规划,突出重点,优化布局,形成合力,保证建成一项、带动一片;坚持省、市、县共建,分级负责,加强协调,适度倾斜,促进项目顺利建设。
  主要目标是:公路方面,实现干线和县乡道路网络化,提高公路等级和滩涂地区的通达程度,形成与苏北地区高等级公路相贯通的格局。水利方面,继续建设通向滩涂的骨干引水工程,扩大沿海地区供水能力;继续实施海堤达标建设,主海堤基本达到抗御50年一遇高潮位加10级风浪标准;整治入海河道,提高沿海垦区独立自排能力。输电方面,建成500千伏沿海输电主通道,建好220千伏市级输电网,强化和完善县级110千伏主网架,加快建设和改造35千伏及以下配电网络,实现各电压等级电网均衡、协调、同步发展;根据负荷增长的需要,新建、扩建一批变电所,增加供电能力;优化网络结构,提高供电可靠性。
  二、加快公路建设,提高公路等级标准
  2004-2006年,继续加快“四纵四横四联”高速公路网建设,推进国省干线公路改造,全面实施农村公路等级化建设,形成联系畅通、往来便捷的沿海交通综合运输体系,使之适应并拉动沿海经济发展。
  (一)实施高速公路联网工程
  继续加快苏通大桥和通启、宿淮、淮盐、连盐、盐通等项目建设,2006年前建成通启、宿淮、盐通高速公路,预计到2006年沿海地区新增高速公路385公里。确保崇苏越江通道与沪崇通道同步建成。
  (二)实施国省干线公路改造工程
  1、南通市进行省道336启东西段、省道335南通市区至金沙段、省道223如东市区至海防公路段、省道334如东西段改造,改造里程共计65公里。
  2、连云港市进行省道324燕尾至南岗段、省道326伊山至六塘段、省道242青口至开发区段、国道327市区北出口段改造,改造里程共计110.9公里。
  3、盐城市进行省道326响水至陈港段、省道329射阳至射阳港段、省道332大丰市区改线段、省道333东台段改造,改造里程共计100.3公里。
  (三)全面实施农村公路等级化建设
  2004-2006年沿海三市完成8097.6公里农村公路建设,其中二级公路1367.2公里,三级公路865.7公里,四级公路5864.7公里。
  1、南通市完成2168.3公里农村公路建设,其中二级公路520.4公里,三级公路316.9公里,四级公路1331公里。
  2、连云港市完成3280.7公里农村公路建设,其中二级公路430.6公里,三级公路256.7公里,四级公路2593.4公里。
  3、盐城市完成2648.6公里农村公路建设,其中二级公路416.2公里,三级公路292.1公里,四级公路1940.3公里。
  三、加强水利设施建设
  (一)根据沿海地区滩涂资源分布和开发条件,近期内加快废黄河以南地区滩涂引水骨干工程建设,进一步改善沿海滩涂地区的淡水供应状况。
  根据全省江水东引北调规划,里下河地区自流引江工程采用“两河引水、三路输水”方案,利用新通扬运河、泰州引江河自流引江1150立方米/秒,由里下河腹部地区的三阳河、卤汀河、泰东河三线向北向东输送,由通榆河一线调度后,斗南片通过沿通榆河各泵站提水,斗北片通过垦区各输水河道自流送水,渠北地区通过通榆河和大套一、二站向滩涂供水。
  继续实施泰东河工程。目前东引灌区的骨干引水工程泰州引江河一期工程已经完成,引水规模300立方米/秒;通榆河中段也已基本开通。在此基础上,近期继续实施连接泰州引江河与通榆河的泰东河工程,为里下河垦区和渠北地区的滩涂开发增供水源。
  在实施工程的同时,针对沿海垦区内河道淤积等问题,疏浚内部引水干河,加强垦区河网建设。
  (二)防潮工程
  规划近期按50年一遇高潮位加十级风浪的设计标准,对重点侵蚀性岸线主海堤进行加固建设。具体要求是:以现有工程为基础,采用土方加固加高堤防断面;根据不同岸段的风潮特点,对堤防进行工程、植物防护,严重侵蚀段和对建筑物安全影响较大的侵蚀区或港汊不稳定区,分别采取工程措施;相应加固、改建与海堤标准不适应的穿堤建筑物,建设堤顶简易防汛公路、上堤道路、通讯设施和其他管理设施,完善非工程措施。
  (三)除涝、冲淤保港
  根据滩涂开发重点区域分布和水利条件,本期除涝、冲淤保港骨干工程继续安排在废黄河以南地区。提高除涝能力的主要工程措施是:结合引水疏浚斗南、斗北垦区河道,加强垦区河网建设。
  四、推进输电设施建设
  通过实施农村电网建设与改造工程,沿海地区2001-2003年输电设施建设方案确定的任务已全部完成,沿海地区的输配电网均得到较大发展,但局部地区仍存在单回线运行、供电可靠性较差的问题。本期继续加强输电设施建设,优化网架结构,进一步提高电网的供电可靠性。
  如东县:新建110千伏栟茶变,扩建110千伏掘南变,新建35千伏河口、东凌和石甸输变电工程。
  海门市:新建220千伏海门输变电工程,扩建110千伏师山变,新建110千伏港口、叠石桥输变电工程,扩建35千伏三星变,建设35千伏张南、货隆和三和输变电工程。
  海安县:新建110千伏腰庄输变电工程,扩建110千伏新城变,新建35千伏吉庆、仁桥输变电工程,扩建35千伏双楼变。
  通州市:新建110千伏正场、先锋输变电工程,改造110千伏刘港线,新建35千伏平东、庆丰输变电工程。
  启东市:建设220千伏汇龙至志良线路,扩建220千伏汇龙变,新建110千伏启兴、久隆输变电工程,扩建35千伏城西变,新建35千伏大兴输变电工程。
  赣榆县:移址重建110千伏赣榆变电所,扩建110千伏北郊变。
  连云港市区:建设220千伏新滩输变电工程,建设220千伏云台变至连云港变的线路和新海电厂至新滩变的线路,220千伏新海电厂至邓庄变的双线开断环入连云港变,新建110千伏苍梧、龙尾输变电工程,扩建110千伏城头变。
  灌云县:建设110千伏城西输变电工程。
  灌南县:新建110千伏邓庄至灌南线路工程,新建110千伏六塘、堆沟输变电工程。
  东海县:改造110千伏双牛、双山线路。
  响水县:新建220千伏响水输变电工程,新建35千伏双港和南郊输变电工程。
  滨海县:扩建110千伏八滩变,新建35千伏化工园区输变电工程。
  射阳县:建成220千伏射阳输变电工程,新建110千伏特庸和阜余输变电工程,建设35千伏通洋输变电工程。
  大丰市:新建110千伏丰富、洋草输变电,建设35千伏万盈、渔业和竹川输变电工程。
  东台市:新建220千伏三仓输变电工程,新建110千伏华丿输变电工程,扩建110千伏安丰变,改造110千伏东安线,新建35千伏五烈、台南输变电工程。
  五、切实加强领导,为加快沿海地区基础设施建设创造良好条件
  沿海各市、县和省各有关部门要把以公路、水利、输电设施为重点的基础设施建设摆上重要议事日程,进一步加强组织领导,严格依法办事,确保各项建设任务顺利完成,为沿海地区的更快发展奠定坚实基础。
  (一)各级交通、水利和电力部门要树立大局观念,增强紧迫感和责任感,各司其职,各负其责,真正把各项工作落到实处。各级计划、财政、税务、国土、环保等部门要积极支持沿海地区基础设施建设,主动做好服务工作。
  (二)为促进沿海地区公路设施建设,省各有关部门要在抓好省重点项目建设的同时,研究有效办法鼓励和支持地方项目建设。
  (三)沿海各市、县要根据本地实际,对本方案的建设项目认真进行细化,将公路、水利、输电设施建设延伸到县、乡(镇),在落实好项目建设条件的基础上,合理安排建设进度,确保项目顺利实施。
  (四)各市、县发展海洋经济工作机构要把方案列入年度发展海洋经济的目标任务,加强管理、协调和监督,集中力量抓落实。进一步加强方案的分解和考核工作,考核指标要尽可能量化。